iFixit Guide For MacBook Pro

9:35 pm, February 26th, 2006, lkahney

MacBook Pro chip

iFixit has published a disassembly guide for the new MacBook Pro.

iFixit publishes a series of Fixit Guides for Apple laptop owners who want to fix their own machines. iFixit makes the guides in the hope customers will buy the spare parts from them. The guides are exceptional — well illustrated and very clear.
IFixit’s CEO Kyle Wiens writes:

We made some notes in the Guide about new and interesting things. Here’s the highlights:

* All major parts are new, and not backwards-compatible with
PowerBooks. This specifically includes the hard drive (SATA 9mm), and
the SuperDrive (4x Matsushita 9.5mm vs the previous 8x 12.7mm drive).
* I think Apple’s using Intel’s 945PM chipset (see

http://www.ifixit.com/Guide/85.1.16.html)

* Apple is using an Intel SATA controller
* The processor is soldered on, so it will be more difficult to
upgrade than the socketed Intel iMac
* The RAM is new, PC2-5300 DDR2
* Speedy 667 MHz bus and 2MB cache on the Core Duo
* The case is easier to get into than the PowerBook G4 15″.
Replacing some parts, like the hard drive or superdrive, will be easier.
Others are about the same, like the keyboard and display.
* Airport and bluetooth are on two separate cards again (they were
previously combined)
* Apple put temperature sensor boards on the heatsink and lower case
assembly:

http://www.ifixit.com/Guide/85/images_large/46.jpg

* iSight, infrared, and bluetooth are all USB.
* The internal case design is different from the PowerBook G4, but
not extensively so. I can tell it was inspired by a combination of the
15″ and 17″ designs.

I’m curious to see what people come up with off the part numbers on
the inside chips. We posted hi-res photos of the logic board:
Logic board top
Logic board bottom